Floor 1, No. 3, Shugang Avenue, Hongmei Town, Dongguan City, Guangdong Province, China
Water spray and rain ingress test chambers featuring adjustable nozzles and rotating tables built to DIN and IEC 60529 standards.
Drip, oscillating spray, water jet, immersion and high-pressure hot-water tests use different apparatus. Define the exact rating, specimen mounting, operating state, flow or pressure and drainage conditions before selecting equipment.
Identify the exact IPX rating and procedure. IPX1–2 dripping, IPX3–4 spray, IPX5–6 jets, IPX7–8 immersion and IPX9K hot-water jets cannot be validated with one generic rain chamber.
Match Equipment to the IPX Level →Provide product dimensions, mass, normal service orientation, required rotation and mounting points. Oscillating tubes, turntables, handheld nozzles and immersion vessels each impose different size and load limits.
Plan Specimen Mounting →Specify nozzle size, water flow, pressure, distance, angle, temperature and exposure time from the method. Define how flow, pressure and test geometry will be calibrated and recorded.
Review Water-Jet Control →State whether the specimen is energized or monitored during exposure. Internal power, signal routing, isolation, leakage protection and emergency shutdown must match the laboratory risk assessment.
Configure Powered Ingress Testing →Confirm water quality, tank capacity, heating requirement, recirculation, filtration, floor drainage and splash containment. IPX9K and large-flow systems may require substantial utilities and heat management.
Prepare Installation Utilities →Define post-test inspection, water ingress limits, dielectric or functional checks, calibration records and report format. Equipment acceptance should verify the required flow, pressure, geometry and timing.
Request an IP Water Test Review →Send the IPX level, specimen dimensions and mass, mounting orientation, powered state, test distance, flow or pressure, water temperature and drainage information.
Request an IP Water Test Configuration Download Rain Test Equipment InformationWater-ingress equipment selection
A drip box, oscillating spray chamber, water-jet system, immersion vessel and high-pressure hot-water tester create different exposures. Choose the exact water-ingress method first, then size the equipment for the enclosure, fixture and operating state. The seven DERUI product pages below are starting points for distinct test requirements—not seven versions of one universal rain chamber.
| Required exposure | Start with this equipment page | Confirm before quotation |
|---|---|---|
| IPX1 / IPX2 falling-water drops | Mobile Phone IPX1/IPX2 Drip Chamber Small enclosures and phone fixtures |
Active drip area, normal and tilted specimen positions, delivery verification and post-test inspection. This is not an oscillating-spray or immersion test. |
| IPX3 / IPX4 spraying or splashing | IPX3/IPX4 Rain Spray Chamber Oscillating-spray configuration |
Tube or nozzle geometry, flow, oscillation, specimen turntable, clearance and exposure time under the adopted method. |
| IPX5 water jet for automotive lighting | Automotive Lighting IPX5 Chamber Application-specific specimen mounting |
Lamp assembly size, service orientation, electrical monitoring, jet distance, flow, access to all required faces and leak-evaluation criteria. |
| IPX5 / IPX6 water jets | IPX5/IPX6 Water-Jet Chamber General cabinet-size jet exposure |
The separate nozzle and flow conditions for each rating, test distance, fixture, powered state, water supply and drainage. The page name does not establish climate control. |
| IPX7 / IPX8 immersion | DR-H504 IPX7/IPX8 Immersion Chamber Submerged enclosure exposure |
Specified depth or pressure, duration, vessel capacity, specimen hold-down, safe handling and inspection. IPX8 conditions must be agreed for the product. |
| High-pressure hot-water jets | IPX9K Hot-Water Test Chamber Method-specific high-pressure exposure |
Name the governing IEC or automotive method and designation; verify water temperature, pressure/flow, nozzle geometry, distance, angles and specimen rotation. Hot-water jets are not steam exposure. |
| Large assemblies needing a walk-in rain room | DR-H506 Walk-In Rain Test Chamber Multi-face rain exposure and project-specific jets |
Complete assembly and fixture envelope, door/loading route, target faces, water circuit and site drainage. Listed IPX5/IPX6 nozzles need a complete method-specific setup. |
A complete requirement makes it possible to select the apparatus, verify the exposure and agree the product acceptance check.
For the required equipment and site scope, send your water-ingress test requirement to DERUI →
Derui Testing Equipment is always committed to providing precise and reliable testing technology solutions for global industrial upgrading，ngaged in design & manufacturing high-quality testing equipment such as paper and packaging testing equipment， Our main products include environmental test chamber and climate test chamber
