Piso 1, No. 3, Avenida Shugang, Vila Hongmei, Cidade de Dongguan, Província de Guangdong, China

Fabricante de câmaras de teste ambiental há 20 anosMais de 3000 entregas a clientes em todo o mundo           Email: shirley@deruitest.com
WhatsApp Consultation:+86 135 2795 8363

Testador de Curto Interno Forçado de Bateria com Controlo de Força e Temperatura de Precisão

A DERUI DR-D210 battery forced internal short circuit tester combines controlled mechanical force, temperature conditioning and synchronized cell-response monitoring. Its fixture and test sequence must be matched to the cell format and exact adopted procedure.

Modelo DR-D210
Faixa de Força Published 0–2,000 N; force programme to confirm
Faixa de Temperatura Published 0°C to +100°C
Monitoring Force, voltage and temperature; channel and export scope to confirm
Cell Scope Fixture selected for the exact cylindrical or prismatic cell and method
Method Boundary Forced internal short circuit differs from UN 38.3 T.5 external short circuit
Seguro e fiável
bem construído
Garantia de qualidade
personalização
MensagemWhatsApp
Número de Linha Direta 15580327593
  • Detalhes do Produto
  • Perguntas Frequentes
  • Contacte-nos
Controlled Cell-Level Abuse Testing

DR-D210 Battery Forced Internal Short Circuit Tester

Apply controlled mechanical force to a prepared lithium-ion cell inside a temperature-controlled test enclosure while recording the cell response. DR-D210 is a specialized cell test system: the cell format, contact method, conditioning, force stop criterion and monitoring channels must be matched to the adopted procedure.

Method boundary: a mechanical forced internal short is different from connecting the external cell terminals together. The quoted fixture and test programme must be reviewed against the exact standard edition and specimen design.
Published force range0–2,000 N
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits0°C to +100°C
Published force accuracy±0.5% full scale; measurement basis to confirm
Published acquisition rateUp to 100 samples/s; channel scope to confirm

What the Test System Does

Controlled force application

The published servo system applies force while reporting the measured force and travel. Confirm the force ramp, actuator resolution and stop logic for the specified method.

Temperature conditioning

The integrated chamber provides a published 0–100°C range. Specify the required cell temperature, tolerance, soak time and measurement location.

Response monitoring

Cell voltage, surface temperature and actuator force can be captured during the event. Define channel count, sample rate per channel, trigger and exported record.

Published DR-D210 Values and Quotation Checks

Item Published statement Confirm before ordering
Force range 0–2,000 N Calibrated measurement range, force resolution, ramp and permitted overload.
Precisão de força ±0.5% full scale Whether this is force measurement or control accuracy; calibration evidence.
Faixa de temperatura 0°C to +100°C Stability, loaded performance, cell temperature sensor and conditioning duration.
Data acquisition Até 100 amostras por segundo Rate for each recorded channel, timestamps, trigger, storage and export format.
Control PLC and touchscreen Programme capacity, event stop conditions and user access controls.
Cell formats Cylindrical and prismatic cells described; other formats discussed as options Exact cell dimensions, contact position, fixture drawing and sample-preparation method.
Test enclosure Stainless-steel interior, observation window and exhaust described Final safety package, exhaust connection, emergency stop and facility interface.

Define the Test Method Before Selecting the Fixture

Adopt the exact document

Record the applicable standard, edition, clause, cell scope and laboratory procedure.

Prepare the cell

Define the permitted cell construction, charge state, conditioning and any controlled preparation required by the method.

Set the contact geometry

Approve the fixture, indenter/contact location, alignment and restraint for the selected cell format.

Set force and stop criteria

Specify force ramp, displacement, voltage event, maximum limits and safe-state response.

Record the response

Capture synchronized force, travel, voltage, temperature, event time and observations as required.

Apply the actual acceptance rule

Use the criteria in the adopted procedure and report deviations, venting or other abnormal events.

Fixture and Cell Scope

Formato da célula cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits Procurement evidence
Cylindrical Cell diameter/length, orientation, restraint and contact location Approved fixture drawing and representative-cell trial.
Prismatic Cell face, thickness, clamping and contact geometry Approved alignment drawing and travel clearance.
Bolsa Method applicability, support surface, swelling clearance and damage risk Written method review before quoting a fixture; do not assume universal compatibility.
Multiple sizes Changeover time, fixture set and sensor repositioning Itemized fixture list and FAT with representative sizes.

Safety and Facility Interfaces

Function Required project definition
Enclosure and viewing Event energy, door/window construction, observation method and access interlock.
Exhaust Expected gas/smoke, connection size, flow, discharge route and facility approval.
Emergency stop Actuator stop, specimen power isolation, chamber response and restart permission.
Detection and alarms Which sensors are supplied, thresholds, calibration and cause-and-effect logic.
Post-event handling Remote observation, cooldown, ventilation, disposal and laboratory procedure.
Safety claim: the words “explosion-proof” on the existing page do not establish a certified containment rating. Confirm the actual design basis and any certificate applicable to the quoted configuration.

Use Standards for Their Actual Test Scope

Reference cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits Decision for DR-D210
IEC 62133-2 Safety of portable sealed lithium cells and batteries Check the adopted edition and whether its forced-internal-short procedure applies to the intended cell; approve fixture and method before claiming support.
JIS C 8714 Japanese lithium-ion cell and battery safety requirements Confirm current applicable edition, specimen preparation and precise procedure.
IEC 62619 / IEC 62660-3 Industrial and automotive cell safety programmes Map the requested clause separately; these references do not make every DR-D210 function universally compliant.
UN 38.3 Lithium transport test programme T.5 is an external short-circuit test. This mechanical FISC tester is not a substitute for the UN 38.3 T.5 apparatus.

For transport-related low-pressure testing, review the separate DR-D203 battery altitude simulation chamber. It serves a different procedure and equipment purpose.

Records and Factory Acceptance

Force calibration

Check force-indication accuracy at agreed points and verify actuator travel, ramp and stop behaviour with a safe dummy specimen.

Temperature and channels

Map agreed temperature points and confirm voltage, temperature, force and displacement channels, timestamps and export.

Safety cause and effect

Demonstrate door interlock, emergency stop, overload, alarms, exhaust command and safe recovery without using a live cell for basic functional checks.

What to Send for an Accurate Proposal

Topic cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
Method Standard, edition, clause, laboratory procedure and acceptance criteria.
Cells Chemistry, format, dimensions, capacity, energy, construction and quantities.
Preparation Permitted cell preparation, charge state, conditioning and handling.
Mechanical profile Fixture geometry, force range, ramp, travel and stop trigger.
Environment and records Temperature point, channels, sample rate, data format and report.
Facility safety Ventilation, exhaust, fire response, power and operator access controls.

Perguntas Frequentes

Is FISC the same as an external short-circuit test?

No. FISC uses a specified prepared cell and mechanical procedure to induce an internal event; an external short-circuit test connects the cell or battery terminals through an external circuit.

Can DR-D210 perform UN 38.3 T.5?

No such capability is established. T.5 is an external short-circuit test and requires a different test setup.

Does a 2,000 N maximum mean every cell uses 2,000 N?

No. The test programme sets the relevant force ramp and termination conditions for the selected cell and method. The published number is an equipment range limit.

Are all cell formats covered?

The current page describes cylindrical and prismatic cells and mentions other fixtures. Confirm method applicability and an approved fixture for each exact cell format.

Does the tester guarantee a pass under IEC 62133-2?

No. The applicable edition, specimen, preparation, test procedure and acceptance rule determine the result. Equipment capability and cell compliance are separate matters.

What should be witnessed at FAT?

Verify force and temperature measurements, channel timing/export, fixture fit, control sequence, interlocks, exhaust command and documentation using safe representative checks.

Specify the Cell and Procedure Before the Tester

Send the cell format, adopted method, preparation, force profile and safety requirements. DERUI can confirm the fixture, control range, monitoring channels and FAT scope for the quoted DR-D210 configuration.

Request a DR-D210 Method Review

FacebookLinkedInXRedditWhatsApp

1. P: O que é um Testador de Curto Interno Forçado de Bateria (FISC)?
A: R: Um Testador de Curto Interno Forçado de Bateria é uma máquina de teste de segurança especializada, projetada para induzir e simular intencionalmente um curto interno dentro de uma célula de bateria de íons de lítio. Aplica força mecânica precisa para replicar modos de falha como a ruptura do separador ou penetração de dendrites, permitindo aos fabricantes avaliar a resposta de segurança da célula, o comportamento térmico e o risco de fuga térmica sob condições controladas de laboratório.

2. P: Qual é a principal diferença entre um teste de curto-circuito interno e externo?
A: A principal diferença reside na localização da falha e no objetivo do teste. Um teste de curto-circuito interno (FISC) simula uma falha dentro da célula (por exemplo, falha no separador) para avaliar a segurança do núcleo e o risco de fuga térmica. Um teste de curto-circuito externo conecta os terminais externos da célula.

para avaliar o sistema de gestão da bateria e os circuitos de proteção externos. Os testes FISC são considerados uma validação de segurança mais severa e fundamental.
A: 3. P: Quais normas de segurança exigem testes de Curto-Circuito Interno Forçado (FISC)? IEC 62133-2 As principais normas internacionais de segurança que obrigam ou recomendam testes FISC incluem, (Cláusula 8.3.9 para células portáteis),, e JIS C 8714:2007 UL 1973 IEC 62660-3 para armazenamento estacionário. É também um método de avaliação crítico dentro de UN 38.3 para baterias automotivas e apoia a validação para.

requisitos de segurança no transporte.
A: 4. P: Como é que um Testador FISC aplica força para criar um curto interno? sistema de motor servo de alta precisão para aplicar uma força controlada e gradual (tipicamente até 2000 N) através de uma sonda ou penetrador na célula da bateria. Esta força deforma as camadas internas (ânodo, separador, cátodo) até entrarem em contacto, criando um curto-circuito interno controlado, enquanto monitoriza parâmetros como força, deslocamento, voltagem e temperatura em tempo real.

5. P: Por que é importante uma câmara de temperatura integrada para testes FISC?
A: O desempenho de segurança da bateria depende fortemente da temperatura. Uma câmara de temperatura integrada (por exemplo, intervalo de 0°C a 100°C) permite testes em várias condições ambientais. Isto é crucial para avaliar se uma célula é mais suscetível a uma fuga térmica quando ocorre um curto interno a temperaturas elevadas ou baixas, fornecendo dados de segurança mais abrangentes.

6. P: Quais dados críticos são monitorizados durante um teste FISC?
A: Durante um teste, o equipamento monitoriza queda de voltagem (para detectar o curto), temperatura da superfície e interna da célula (para acompanhar a geração de calor e o início da fuga térmica), e força/deslocamento aplicado. Sistemas avançados amostraram estes dados a altas velocidades (por exemplo, 100 amostras/sec) para capturar com precisão a sequência rápida de eventos de falha.

7. P: Quais são as características essenciais de segurança do próprio testador?
A: Dada a natureza perigosa do teste, o testador deve possuir construção à prova de explosões, uma câmara de segurança selada com uma janela de visualização, um sistema automático de supressão de incêndios (por exemplo, CO2), ventilação de gases nocivos, e botões de paragem de emergência. Estas características protegem os operadores e equipamentos de possíveis rupturas de células ou incêndios.

8. P: Quais os formatos de células de bateria que podem ser testados?
A: Um testador FISC versátil pode acomodar células prismáticas, cilíndricas e de envelope. Isto é conseguido através de suportes e mandris personalizáveis que seguram firmemente cada tipo de célula no lugar durante a aplicação de força, garantindo condições de teste consistentes e fiáveis em diferentes linhas de produtos.

9. P: Como é determinado o resultado Aprovado/Reprovado num teste FISC?
A: Os critérios de Aprovado/Reprovado são definidos pela norma de segurança relevante (como a IEC 62133-2). Geralmente, um “aprovado” requer que a célula não exploda nem pegue fogo. Critérios adicionais frequentemente incluem limites de aumento de temperatura máxima, duração da chama (se houver), e que não sejam ejetados projéteis. O registo de dados do testador fornece a evidência para esta avaliação.

10. P: Quem utiliza este equipamento e em que fase da produção?
A: Testadores FISC são utilizados por fabricantes de células de bateria, integradores de VE e ESS, e laboratórios de testes independentes. São utilizados principalmente na fase de P&D para validação de materiais e design, e para testes de qualificação e certificação. Devido à sua natureza destrutiva, normalmente não é utilizado em todas as células na produção em massa, mas numa amostragem para garantia de qualidade.

WhatsAppWhatsApp
WhatsAppWhatsApp
WhatsApp
MensagemMensagem

Solicitar Orçamento