Этаж 1, д. 3, проспект Шуган, город Хунмэй, город Дунгуань, провинция Гуандун, Китай

Производитель климатических камер для испытаний окружающей среды более 20 летБолее 3000 заказов клиентов по всему миру           Электронная почта: shirley@deruitest.com
WhatsApp Consultation:+86 135 2795 8363

Тестер принудительного внутреннего короткого замыкания аккумулятора с точным управлением силой и контролем температуры

The DERUI DR-D210 battery forced internal short circuit tester combines controlled mechanical force, temperature conditioning and synchronized cell-response monitoring. Its fixture and test sequence must be matched to the cell format and exact adopted procedure.

Модель DR-D210
Диапазон силы Published 0–2,000 N; force programme to confirm
Диапазон температур Published 0°C to +100°C
Monitoring Force, voltage and temperature; channel and export scope to confirm
Cell Scope Fixture selected for the exact cylindrical or prismatic cell and method
Method Boundary Forced internal short circuit differs from UN 38.3 T.5 external short circuit
Безопасно и надежно
качественно изготовлено
Гарантия качества
кастомизация
СообщениеWhatsApp
Номер горячей линии 15580327593
  • Детали продукта
  • Часто задаваемые вопросы
  • Свяжитесь с нами
Controlled Cell-Level Abuse Testing

DR-D210 Battery Forced Internal Short Circuit Tester

Apply controlled mechanical force to a prepared lithium-ion cell inside a temperature-controlled test enclosure while recording the cell response. DR-D210 is a specialized cell test system: the cell format, contact method, conditioning, force stop criterion and monitoring channels must be matched to the adopted procedure.

Method boundary: a mechanical forced internal short is different from connecting the external cell terminals together. The quoted fixture and test programme must be reviewed against the exact standard edition and specimen design.
Published force range0–2,000 N
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits0°C to +100°C
Published force accuracy±0.5% full scale; measurement basis to confirm
Published acquisition rateUp to 100 samples/s; channel scope to confirm

What the Test System Does

Controlled force application

The published servo system applies force while reporting the measured force and travel. Confirm the force ramp, actuator resolution and stop logic for the specified method.

Temperature conditioning

The integrated chamber provides a published 0–100°C range. Specify the required cell temperature, tolerance, soak time and measurement location.

Response monitoring

Cell voltage, surface temperature and actuator force can be captured during the event. Define channel count, sample rate per channel, trigger and exported record.

Published DR-D210 Values and Quotation Checks

Пункт Published statement Confirm before ordering
Force range 0–2,000 N Calibrated measurement range, force resolution, ramp and permitted overload.
Точность силы ±0.5% full scale Whether this is force measurement or control accuracy; calibration evidence.
Диапазон температур 0°C to +100°C Stability, loaded performance, cell temperature sensor and conditioning duration.
Data acquisition До 100 образцов в секунду Rate for each recorded channel, timestamps, trigger, storage and export format.
Control PLC and touchscreen Programme capacity, event stop conditions and user access controls.
Cell formats Cylindrical and prismatic cells described; other formats discussed as options Exact cell dimensions, contact position, fixture drawing and sample-preparation method.
Test enclosure Stainless-steel interior, observation window and exhaust described Final safety package, exhaust connection, emergency stop and facility interface.

Define the Test Method Before Selecting the Fixture

Adopt the exact document

Record the applicable standard, edition, clause, cell scope and laboratory procedure.

Prepare the cell

Define the permitted cell construction, charge state, conditioning and any controlled preparation required by the method.

Set the contact geometry

Approve the fixture, indenter/contact location, alignment and restraint for the selected cell format.

Set force and stop criteria

Specify force ramp, displacement, voltage event, maximum limits and safe-state response.

Record the response

Capture synchronized force, travel, voltage, temperature, event time and observations as required.

Apply the actual acceptance rule

Use the criteria in the adopted procedure and report deviations, venting or other abnormal events.

Fixture and Cell Scope

cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits Procurement evidence
Cylindrical Cell diameter/length, orientation, restraint and contact location Approved fixture drawing and representative-cell trial.
Prismatic Cell face, thickness, clamping and contact geometry Approved alignment drawing and travel clearance.
Pouch Method applicability, support surface, swelling clearance and damage risk Written method review before quoting a fixture; do not assume universal compatibility.
Multiple sizes Changeover time, fixture set and sensor repositioning Itemized fixture list and FAT with representative sizes.

Safety and Facility Interfaces

Function Required project definition
Enclosure and viewing Event energy, door/window construction, observation method and access interlock.
Exhaust Expected gas/smoke, connection size, flow, discharge route and facility approval.
Emergency stop Actuator stop, specimen power isolation, chamber response and restart permission.
Detection and alarms Which sensors are supplied, thresholds, calibration and cause-and-effect logic.
Post-event handling Remote observation, cooldown, ventilation, disposal and laboratory procedure.
Safety claim: the words “explosion-proof” on the existing page do not establish a certified containment rating. Confirm the actual design basis and any certificate applicable to the quoted configuration.

Use Standards for Their Actual Test Scope

Reference cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits Decision for DR-D210
IEC 62133-2 Safety of portable sealed lithium cells and batteries Check the adopted edition and whether its forced-internal-short procedure applies to the intended cell; approve fixture and method before claiming support.
JIS C 8714 Japanese lithium-ion cell and battery safety requirements Confirm current applicable edition, specimen preparation and precise procedure.
IEC 62619 / IEC 62660-3 Industrial and automotive cell safety programmes Map the requested clause separately; these references do not make every DR-D210 function universally compliant.
UN 38.3 Lithium transport test programme T.5 is an external short-circuit test. This mechanical FISC tester is not a substitute for the UN 38.3 T.5 apparatus.

For transport-related low-pressure testing, review the separate DR-D203 battery altitude simulation chamber. It serves a different procedure and equipment purpose.

Records and Factory Acceptance

Force calibration

Check force-indication accuracy at agreed points and verify actuator travel, ramp and stop behaviour with a safe dummy specimen.

Temperature and channels

Map agreed temperature points and confirm voltage, temperature, force and displacement channels, timestamps and export.

Safety cause and effect

Demonstrate door interlock, emergency stop, overload, alarms, exhaust command and safe recovery without using a live cell for basic functional checks.

What to Send for an Accurate Proposal

Topic cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
Method Standard, edition, clause, laboratory procedure and acceptance criteria.
Cells Chemistry, format, dimensions, capacity, energy, construction and quantities.
Preparation Permitted cell preparation, charge state, conditioning and handling.
Mechanical profile Fixture geometry, force range, ramp, travel and stop trigger.
Environment and records Temperature point, channels, sample rate, data format and report.
Facility safety Ventilation, exhaust, fire response, power and operator access controls.

Часто задаваемые вопросы

Is FISC the same as an external short-circuit test?

No. FISC uses a specified prepared cell and mechanical procedure to induce an internal event; an external short-circuit test connects the cell or battery terminals through an external circuit.

Can DR-D210 perform UN 38.3 T.5?

No such capability is established. T.5 is an external short-circuit test and requires a different test setup.

Does a 2,000 N maximum mean every cell uses 2,000 N?

No. The test programme sets the relevant force ramp and termination conditions for the selected cell and method. The published number is an equipment range limit.

Are all cell formats covered?

The current page describes cylindrical and prismatic cells and mentions other fixtures. Confirm method applicability and an approved fixture for each exact cell format.

Does the tester guarantee a pass under IEC 62133-2?

No. The applicable edition, specimen, preparation, test procedure and acceptance rule determine the result. Equipment capability and cell compliance are separate matters.

What should be witnessed at FAT?

Verify force and temperature measurements, channel timing/export, fixture fit, control sequence, interlocks, exhaust command and documentation using safe representative checks.

Specify the Cell and Procedure Before the Tester

Send the cell format, adopted method, preparation, force profile and safety requirements. DERUI can confirm the fixture, control range, monitoring channels and FAT scope for the quoted DR-D210 configuration.

Request a DR-D210 Method Review

FacebookLinkedInXRedditWhatsApp

1. В: Что такое тестер внутреннего короткого замыкания батареи (FISC)?
A: О: Тестер внутреннего короткого замыкания батареи — это специализированное устройство для проверки безопасности, предназначенное для намеренного вызова и моделирования внутреннего короткого замыкания внутри литий-ионной ячейки. Он применяет точное механическое усилие для воспроизведения режимов отказа, таких как разрушение сепаратора или проникновение дендритов, позволяя производителям оценить реакцию ячейки на безопасность, тепловое поведение и риск теплового разгона в контролируемых лабораторных условиях.

2. В: В чем ключевое различие между испытанием на внутреннее и внешнее короткое замыкание?
A: Ключевое различие заключается в месте возникновения неисправности и цели испытания. Испытание на внутреннее короткое замыкание (FISC) имитирует неисправность внутри элемента (например, повреждение сепаратора) для оценки основной безопасности и риска теплового разгона. Испытание на внешнее короткое замыкание подключает внешние клеммы элемента для оценки системы управления батареей и внешних цепей защиты. Тестирование FISC считается более серьезной и фундаментальной проверкой безопасности.

3. В: Какие стандарты безопасности требуют испытания на принудительное внутреннее короткое замыкание (FISC)?
A: Ключевые международные стандарты безопасности, предписывающие или рекомендующие тестирование FISC, включают IEC 62133-2 (Пункт 8.3.9 для портативных элементов), JIS C 8714:2007, и UL 1973 для стационарных накопителей энергии. Это также важный метод оценки в рамках IEC 62660-3 для автомобильных аккумуляторов и поддерживает проверку на соответствие UN 38.3 требованиям безопасности при транспортировке.

4. В: Как тестер FISC применяет силу для создания внутреннего короткого замыкания?
A: Высококачественный тестер FISC использует система высокоточного сервомотора для применения управляемой, постепенной силы (обычно до 2000 Н) через зонд или индентор на батарейную ячейку. Эта сила деформирует внутренние слои (анод, сепаратор, катод) до контакта, создавая управляемое внутреннее короткое замыкание, при этом в реальном времени контролируются параметры, такие как сила, смещение, напряжение и температура.

5. В: Почему важна интегрированная камера для температуры при тестировании FISC?
A: Безопасность батареи сильно зависит от температуры. Интегрированная камера для температуры (например, диапазон от 0°C до 100°C) позволяет проводить испытания в различных условиях окружающей среды. Это важно для оценки, более ли склонна ячейка к тепловому разгоранию при внутреннем коротком замыкании при высоких или низких температурах, что обеспечивает более полные данные о безопасности.

6. В: Какие критические данные мониторятся во время теста FISC?
A: Во время теста оборудование отслеживает падение напряжения (для обнаружения короткого замыкания), температуру поверхности и внутреннюю температуру ячейки (для отслеживания генерации тепла и начала теплового разгона), и применяемую силу/смещение. Продвинутые системы собирают эти данные с высокой скоростью (например, 100 образцов в секунду), чтобы точно зафиксировать быструю последовательность событий отказа.

7. В: Какие основные функции безопасности есть у самого тестера?
A: Учитывая опасный характер теста, тестер должен иметь огнестойкая конструкция, , герметичную камеру безопасности с обзорным окном, , автоматическая система пожаротушения (например, CO2), выхлопные отверстия для вредных газов, и кнопками аварийной остановки. Эти функции защищают операторов и оборудование от потенциального разрыва ячейки или пожара.

8. В: Какие форматы батарейных ячеек можно тестировать?
A: Многофункциональный тестер FISC может вместить призматические, цилиндрические и пакеты ячеек. Это достигается с помощью настраиваемых фиксаторов и мандрел которые надежно удерживают каждый тип ячейки на месте во время приложения силы, обеспечивая последовательные и надежные условия тестирования для различных линий продукции.

9. В: Как определяется результат Проход/Неудача в тесте FISC?
A: Критерии Проход/Неудача определяются соответствующим стандартом безопасности (например, IEC 62133-2). Обычно “проход” означает, что ячейка не взрывается и не загорается. Дополнительные критерии часто включают ограничения по максимальному повышению температуры, продолжительности пламени (если есть) и отсутствию выброса снарядов. Запись данных тестера предоставляет доказательства для этой оценки.

10. В: Кто использует это оборудование и на какой стадии производства?
A: Тестеры FISC используют производители ячеек батарей, интеграторы электромобилей и систем хранения энергии, и независимые лаборатории тестирования. Они в основном используются на этапе НИОКР для проверки материалов и конструкции, а также для квалификационных и сертификационных испытаний. Из-за своей разрушительной природы, обычно не используется на каждой ячейке массового производства, а на выборочной основе для обеспечения качества.

WhatsAppWhatsApp
WhatsAppWhatsApp
WhatsApp
СообщениеСообщение

Запросить коммерческое предложение