فرش 1، نمبر 3، شوگوانگ ایونیو، ہومائی ٹاؤن، ڈونگ گوان شہر، گوانگ ڈونگ صوبہ، چین
Water spray and rain ingress test chambers featuring adjustable nozzles and rotating tables built to DIN and IEC 60529 standards.
Drip, oscillating spray, water jet, immersion and high-pressure hot-water tests use different apparatus. Define the exact rating, specimen mounting, operating state, flow or pressure and drainage conditions before selecting equipment.
Identify the exact IPX rating and procedure. IPX1–2 dripping, IPX3–4 spray, IPX5–6 jets, IPX7–8 immersion and IPX9K hot-water jets cannot be validated with one generic rain chamber.
Match Equipment to the IPX Level →Provide product dimensions, mass, normal service orientation, required rotation and mounting points. Oscillating tubes, turntables, handheld nozzles and immersion vessels each impose different size and load limits.
Plan Specimen Mounting →Specify nozzle size, water flow, pressure, distance, angle, temperature and exposure time from the method. Define how flow, pressure and test geometry will be calibrated and recorded.
Review Water-Jet Control →State whether the specimen is energized or monitored during exposure. Internal power, signal routing, isolation, leakage protection and emergency shutdown must match the laboratory risk assessment.
Configure Powered Ingress Testing →Confirm water quality, tank capacity, heating requirement, recirculation, filtration, floor drainage and splash containment. IPX9K and large-flow systems may require substantial utilities and heat management.
Prepare Installation Utilities →Define post-test inspection, water ingress limits, dielectric or functional checks, calibration records and report format. Equipment acceptance should verify the required flow, pressure, geometry and timing.
Request an IP Water Test Review →Send the IPX level, specimen dimensions and mass, mounting orientation, powered state, test distance, flow or pressure, water temperature and drainage information.
Request an IP Water Test Configuration Download Rain Test Equipment InformationTest enclosure water ingress resistance with our versatile rain test chambers. Capable of conducting waterproof testing across the full IP code spectrum—from drip-proof (IPX1/IPX2) and water spray (IPX3/IPX4) to high-pressure jet stream (IPX5/IPX6) and high-temperature steam jet (IPX9K)—our rain simulation chambers feature automated oscillating tubes and variable-speed turntables. Built strictly per IEC 60529, ISO 20653, and DIN 40050-9, they ensure automotive and consumer electronics enclosure integrity. Get your free quotation now.
درائی ٹیسٹنگ آلات ہمیشہ عالمی صنعتی اپ گریڈنگ کے لیے دقیق اور قابل اعتماد ٹیسٹنگ ٹیکنالوجی حل فراہم کرنے کے لیے پرعزم ہے، اور اعلیٰ معیار کے ٹیسٹنگ آلات جیسے کاغذ اور پیکیجنگ ٹیسٹنگ آلات کے ڈیزائن اور مینوفیکچرنگ میں مصروف ہے، ہمارے اہم مصنوعات میں شامل ہیں ماحولیاتی ٹیسٹ چیمبر اور موسمیاتی ٹیسٹ چیمبر
