Environmental Test Chamber Resources

CASS TEST EXPLAINED CASS Is a Specific Acidic Salt-Fog Method—not a Generic Name for Every Corrosion Test Direct answer: CASS stands for Copper-Accelerated Acetic Acid Salt Spray. ASTM B368 specifi...

COMPANY NEWS GUANGDONG DERUI TESTING EQUIPMENT CO., LTD.  ·  SEPTEMBER 2026 Two IP test chambers — one sand dust unit, one IPX7 immersion unit — are packed, loaded and ...

Xenon-arc weathering standard comparison ASTM G155 and ISO 4892-2 Are Related—but Not Interchangeable Both documents use optically filtered xenon-arc light to reproduce weathering effects associate...

In Q2 2026, a Vietnam-based Tier 1 automotive electronics supplier partnered with Derui Testing Equipment to validate ECU and sensor reliability across tropical and extreme-cycling environments — a...

A procurement-grade reference for engineers and QC managers selecting altitude test chambers that meet MIL-STD-810H Method 500 — covering four test procedures, pressure–altitude correlations, chamb...

A procurement-grade reference for selecting, operating, and validating dust ingress test chambers built to IEC 60529 Categories 1 and 2 — including pass criteria, equipment parameters, and supplier evaluation criteria.

UV Weathering Testing: ASTM G154 and ISO 4892 guide covering QUV fluorescent UV (UVA-340, UVB-313, UVA-351) vs xenon arc chambers. Includes test cycles, irradiance setpoints, BPT ranges, and chamber selection for material durability QC.

Recently, Guangdong Derui Testing Equipment Co., Ltd. (hereinafter referred to as "Derui Testing") welcomed a delegation of Vietnamese clients for an on-site inspection and technical exchange at th...

Guangdong Derui Testing Equipment Co., Ltd. has recently entered into a collaboration with a China Aerospace Research Institute, and the constant temperature and humidity test chamber supplied by D...

Recently, Guangdong Derui Testing Equipment Co., Ltd. (“Derui Testing”) officially established a cooperative relationship with China Automotive Technology and Research Center Co., Ltd. (“CATARC”). ...

A practical guide to IEC 60068-2, MIL-STD-810H, and ISO 16750-4 temperature test standards. Which one does your product actually need?

Compare temperature test chambers and thermal shock chambers: 7 key differences, compliance standards, ramp rates, and which one your lab actually needs.

Learn how to select the right temperature test chamber: temperature range, chamber volume, ramp rate, compliance standards (IEC 60068, MIL-STD-810, ISO 16750), and total cost of ownership.

A comprehensive guide to automotive temperature humidity testing covering ISO 16750 standards, test methodologies, failure modes, and chamber selection for reliable automotive components.

Hướng dẫn toàn diện về kiểm tra nhiệt độ và độ ẩm, bao gồm các tiêu chuẩn quốc tế (IEC 60068, MIL-STD-810), phương pháp kiểm tra và lựa chọn buồng thử nghiệm cho các ngành điện tử, ô tô và dược phẩm.

salt spray corrosion test chambers Testing for Corrosion Resistance: Standards, Methods, and Chamber Selection Guide Published: May 2026 | Author: Derui Environmental | Category: Technical Articles...