ชั้น 1, หมายเลข 3, ถนนชูการ์, เมืองหงเหมย, ตงกวน, มณฑลกวางตุ้ง, ประเทศจีน
Explore our full range of high-precision temperature, humidity, thermal shock, and altitude test chambers engineered to global IEC and ISO standards.
Select the chamber from the governing method, environmental stress, specimen, operating load and acceptance criteria—not from a catalogue range alone. A complete requirement allows chamber type, workspace, performance, safety interfaces and site utilities to be evaluated together.
Start with the applicable IEC, ISO, ASTM, MIL-STD, GB or customer procedure. Record every exposure stage, setpoint, tolerance, dwell, transition, cycle count and pass criterion so the chamber is selected for the actual method rather than a general test name.
Review Test Standards and Methods →Define whether the product requires temperature, humidity, thermal shock, altitude, salt fog, UV or xenon weathering, dust, rain or a combined exposure. Different stresses require different conditioning, circulation, measurement and specimen-handling systems.
Compare Environmental Test Systems →Provide the loaded specimen envelope, quantity, mass, fixtures, shelves, cable routing and required clearance. Usable workspace and airflow around the load matter more than nominal chamber volume and directly affect uniformity and specimen response.
Plan Chamber Size and Loading →State whether ramp rate, recovery and tolerances apply to chamber air or the specimen. Product thermal mass, energized heat output, fixtures and door openings can change pull-down, heat-up, recovery and refrigeration capacity.
Evaluate Loaded Chamber Performance →List powered operation, sensor channels, internal power, cable ports, data recording, observation, pressure or fluid connections and foreseeable hazards. Battery, altitude and other high-risk tests require application-specific containment, alarms and interlocks.
Review Safety and Monitoring Options →Confirm electrical supply, cooling method, water, drainage, exhaust, ambient limits, installation access and service clearance. Define calibration, uniformity, fluctuation, loaded performance, alarms, records and documentation required for factory or site acceptance.
Prepare a Configuration and FAT Review →Send the standard, complete exposure profile, specimen dimensions and mass, powered heat output, monitoring points, safety risks, available utilities and required delivery date. DERUI will review chamber type, usable workspace, loaded performance and configuration before quotation.
Request a Test Chamber Configuration Review Download Test Chamber InformationEnvironmental test equipment catalog
DERUI's catalog spans controlled climate, rapid thermal transfer, low pressure, weathering, corrosion, ingress protection and application-specific battery systems. The product cards above show individual listings; the routes below help you choose the right equipment family before comparing models. One chamber may cover part of a qualification plan, but no category-wide specification establishes every method, load or safety function.
| Test objective | Choose a category | Keep the methods distinct |
|---|---|---|
| Hot, cold, humidity or combined climate | ห้องทดสอบอุณหภูมิ ห้องทดสอบสิ่งแวดล้อม |
Define the exact temperature–humidity combinations, loaded profile, heat output and monitoring. A dry-temperature model does not automatically control humidity. |
| Rapid hot–cold transfer or a large loaded specimen | ห้องทดสอบช็อกความร้อน Walk-In Test Chamber |
Thermal shock depends on transfer and recovery; walk-in selection depends on access, usable workspace, floor load and facility integration. A larger room does not imply rapid shock capability. |
| Reduced pressure or battery-specific testing | ห้องทดสอบความสูง ห้องทดสอบแบตเตอรี่ |
Specify absolute pressure and any simultaneous temperature profile. Battery environmental, mechanical, electrical and fire tests need different mechanisms and a project-specific hazard assessment. |
| Ingress by particles or water | ห้องทดสอบฝุ่น ห้องทดสอบฝน |
Choose the exact dust or IP water method, specimen mounting and acceptance criteria. Dust, spray, immersion and high-pressure hot-water exposures are not interchangeable. |
| Corrosion exposure | ห้องทดสอบสเปรย์เกลือ | Define neutral salt spray, CASS or another specified procedure, specimen size, collection conditions and whether a cyclic climate sequence is required. |
| Light-driven material weathering | UV Chamber ห้อง Xenon |
Fluorescent UV and filtered xenon light use different spectra and procedures. Match lamp/filter, irradiance, specimen temperature, moisture and the property being measured. |
A useful RFQ connects the procedure, specimen, facility and acceptance evidence. Include these four inputs for each test stage.
Send your complete test plan to DERUI for a chamber-family and configuration review →
อุปกรณ์ทดสอบเดรูอิทมุ่งมั่นให้บริการโซลูชันทดสอบที่แม่นยำและเชื่อถือได้สำหรับการอัปเกรดอุตสาหกรรมทั่วโลก，มีส่วนร่วมในการออกแบบและผลิตอุปกรณ์ทดสอบคุณภาพสูง เช่น อุปกรณ์ทดสอบกระดาษและบรรจุภัณฑ์ ผลิตภัณฑ์หลักของเราได้แก่ ห้องทดสอบสิ่งแวดล้อม และ ห้องทดสอบสภาพอากาศ
