الطابق 1، رقم 3، شارع شوغانغ، بلدة هونغمي، مدينة دونغقوان، مقاطعة قوانغدونغ، الصين
High-performance climate simulation chambers providing broad temperature and humidity control for ESS and quality assurance.
Special-purpose chambers combine environmental conditioning with mechanical motion, measurement, gas sampling or specimen operation. Reliable design begins with the complete sequence, interfaces and acceptance criteria—not a generic chamber specification.
Describe temperature, humidity, vibration, tensile loading, bending, ozone, VOC sampling or other actions in the order they occur. State whether stresses are simultaneous or sequential and how each stage is controlled.
Map the Complete Test Sequence →Provide drawings for the shaker, tensile frame, folding mechanism, grips, fixtures and moving parts. Interface openings, thermal isolation, sealing, alignment and travel must preserve both chamber performance and measurement accuracy.
Review Combined-System Interfaces →List force, displacement, temperature, humidity, voltage, gas sampling and other channels. Define synchronization, sampling rate, controller communication, data export and the event that starts or stops each test stage.
Plan Measurement Integration →State specimen dimensions, mass, powered operating mode, emitted heat, cables, fluids and expected emissions. These conditions affect airflow, refrigeration, seals, background contamination and safety design.
Define Specimen Operating Conditions →Identify corrosive gases, ozone, VOCs, flammable emissions, high loads and moving mechanisms. Chamber materials, exhaust, interlocks and protective functions must follow the documented risk assessment.
Review Safety and Materials →Specify environmental tolerances, mechanical accuracy, interface leakage, data synchronization, alarm logic and test reports. A written acceptance plan prevents disagreement after the combined system is manufactured.
Submit a Custom Test Requirement →Send the procedure, specimen and fixture drawings, environmental profile, mechanical actions, measurement channels, utilities, safety requirements and acceptance criteria.
Request a Combined-System Engineering Review View Environmental Chamber CatalogsEnvironmental system selection
This category includes more than temperature-and-humidity cabinets. Its eleven product pages cover stand-alone thermal exposure, combined climate and mechanical testing, battery programs, emissions or ozone exposure, and pressure-cooker testing. Choose the required stress and specimen interface first; a general “environmental chamber” label is not a substitute for a test plan.
| Required stress or task | Start with these product pages | Define before quotation |
|---|---|---|
| Temperature exposure or fast thermal change | 50 L Small Environmental Chamber غرفة اختبار درجة حرارة عالية Rapid Temperature Change Chamber |
Temperature limits, ramp rate at the actual load, dwell time, workspace and heat dissipation. Do not assume humidity control on a temperature-only model. |
| Climate combined with a mechanical test | Temperature Bending Test Machine غرفة اختبار الاهتزاز والبيئة المناخية غرفة اختبار الشد والبيئة |
Fixture and actuator interface, motion or force profile, sealing, feedthroughs and synchronized measurement. The mechanical system and enclosure must be reviewed as one assembly. |
| Battery environmental evaluation | Battery Environmental Reliability Chamber Environmental Chamber for Battery Testing |
Cell, module or pack size; state of charge; live electrical load; monitoring; foreseeable hazards; and the site safety plan. Safety provisions are project-specific, not implied by the category name. |
| VOC emissions or ozone aging | One Cubic VOC Test Chamber غرفة اختبار الشيخوخة بالأوزون |
Pollutant or analyte, sampling method, air exchange, materials compatibility, exhaust and exposure setpoints. Neither instrument is a generic humidity chamber. |
| Pressurized humidity / PCT | حجرة اختبار PCT | The specified pressure, temperature, humidity, sample handling and safety procedure. PCT is a separate equipment class from an atmospheric climate cabinet. |
For a useful proposal, define the specimen, all stresses and the measurement boundary—not just the target chamber volume.
Need a stand-alone walk-in climate room instead? Compare the walk-in chamber range. For a defined combined system, send your test plan to DERUI →
شركة ديروي لمعدات الاختبار ملتزمة دائمًا بتقديم حلول تكنولوجيا الاختبار الدقيقة والموثوقة للتطوير الصناعي العالمي، وتعمل في تصميم وتصنيع معدات اختبار عالية الجودة مثل معدات اختبار الورق والتعبئة، وتشمل منتجاتنا الرئيسية حجرة اختبار بيئية و حجرة اختبار المناخ
