Çin, Guangdong Eyaleti, Dongguan Şehri, Hongmei Kasabası, Shugang Caddesi, No. 3, Kat 1

20 yıllık çevresel test odası üreticisiDünya genelinde 3000+ müşteri teslimatı           E-posta: shirley@deruitest.com
WhatsApp Consultation:+86 135 2795 8363
Çevresel Test OdalarıÇevresel Test Odaları

Environmental Test Chambers Catalog & Testing Solutions

Explore our full range of high-precision temperature, humidity, thermal shock, and altitude test chambers engineered to global IEC and ISO standards.

Çift Katmanlı Sıcaklık Kontrollü Test Odası

Çift Katmanlı Sıcaklık Kontrollü Test Odası

Üç Katmanlı Yüksek Düşük Sıcaklık Patlamaya Karşı Test Odası

Üç Katmanlı Yüksek Düşük Sıcaklık Patlamaya Karşı Test Odası

2000L Climate and Temperature Test Chamber

2000L Climate and Temperature Test Chamber

3000L Büyük Patlamaya Dayanıklı Sıcaklık ve Nem Test Odası

3000L Büyük Patlamaya Dayanıklı Sıcaklık ve Nem Test Odası

Walk-In Temperature and Humidity Test Chamber Modular Environmental Drive-In Room

Walk-In Temperature and Humidity Test Chamber Modular Environmental Drive-In Room

Yüksek Sıcaklık Test Odası

Yüksek Sıcaklık Test Odası

Çift 85 Yüksek Nemli Hava Odası

Çift 85 Yüksek Nemli Hava Odası

Environmental Chamber FAT Checklist and Acceptance Record Template

Environmental Chamber FAT Checklist and Acceptance Record Template

Kesin Kuvvet ve Sıcaklık Kontrolü ile Batarya Zorunlu İç Kısa Devre Test Cihazı

Kesin Kuvvet ve Sıcaklık Kontrolü ile Batarya Zorunlu İç Kısa Devre Test Cihazı

Batarya Çevresel Güvenilirlik Test Odası

Batarya Çevresel Güvenilirlik Test Odası

Akü Sıcaklık Test Odası

Akü Sıcaklık Test Odası

Akü Yükseklik Simülasyonu Test Odası

Akü Yükseklik Simülasyonu Test Odası

Batarya Testi İçin Çevresel Oda

Batarya Testi İçin Çevresel Oda

Akü Darbe Test Odası

Akü Darbe Test Odası

50L Small Environmental Test Chamber DR-H201-50

50L Small Environmental Test Chamber DR-H201-50

Bir Kübik VOC Test Odası

Bir Kübik VOC Test Odası

Specify an Environmental Test Chamber from the Complete Test Requirement

Select the chamber from the governing method, environmental stress, specimen, operating load and acceptance criteria—not from a catalogue range alone. A complete requirement allows chamber type, workspace, performance, safety interfaces and site utilities to be evaluated together.

Governing Standards and Test Sequence

Start with the applicable IEC, ISO, ASTM, MIL-STD, GB or customer procedure. Record every exposure stage, setpoint, tolerance, dwell, transition, cycle count and pass criterion so the chamber is selected for the actual method rather than a general test name.

Review Test Standards and Methods →

Environmental Stress and Chamber Technology

Define whether the product requires temperature, humidity, thermal shock, altitude, salt fog, UV or xenon weathering, dust, rain or a combined exposure. Different stresses require different conditioning, circulation, measurement and specimen-handling systems.

Compare Environmental Test Systems →

Workspace, Specimen and Airflow

Provide the loaded specimen envelope, quantity, mass, fixtures, shelves, cable routing and required clearance. Usable workspace and airflow around the load matter more than nominal chamber volume and directly affect uniformity and specimen response.

Plan Chamber Size and Loading →

Performance under the Actual Test Load

State whether ramp rate, recovery and tolerances apply to chamber air or the specimen. Product thermal mass, energized heat output, fixtures and door openings can change pull-down, heat-up, recovery and refrigeration capacity.

Evaluate Loaded Chamber Performance →

Monitoring, Safety and Test Interfaces

List powered operation, sensor channels, internal power, cable ports, data recording, observation, pressure or fluid connections and foreseeable hazards. Battery, altitude and other high-risk tests require application-specific containment, alarms and interlocks.

Review Safety and Monitoring Options →

Site Utilities and Acceptance Criteria

Confirm electrical supply, cooling method, water, drainage, exhaust, ambient limits, installation access and service clearance. Define calibration, uniformity, fluctuation, loaded performance, alarms, records and documentation required for factory or site acceptance.

Prepare a Configuration and FAT Review →

Need the Right Chamber for a Defined Test Requirement?

Send the standard, complete exposure profile, specimen dimensions and mass, powered heat output, monitoring points, safety risks, available utilities and required delivery date. DERUI will review chamber type, usable workspace, loaded performance and configuration before quotation.

Request a Test Chamber Configuration Review Download Test Chamber Information

Environmental test equipment catalog

Find the Chamber Family for Your Actual Test

DERUI's catalog spans controlled climate, rapid thermal transfer, low pressure, weathering, corrosion, ingress protection and application-specific battery systems. The product cards above show individual listings; the routes below help you choose the right equipment family before comparing models. One chamber may cover part of a qualification plan, but no category-wide specification establishes every method, load or safety function.

Test objective Choose a category Keep the methods distinct
Hot, cold, humidity or combined climate Sıcaklık Test Odası
Çevresel Test Odası
Define the exact temperature–humidity combinations, loaded profile, heat output and monitoring. A dry-temperature model does not automatically control humidity.
Rapid hot–cold transfer or a large loaded specimen Termal Şok Test Odası
Walk-In Test Chamber
Thermal shock depends on transfer and recovery; walk-in selection depends on access, usable workspace, floor load and facility integration. A larger room does not imply rapid shock capability.
Reduced pressure or battery-specific testing İrtifa Test Odası
Pil Test Odası
Specify absolute pressure and any simultaneous temperature profile. Battery environmental, mechanical, electrical and fire tests need different mechanisms and a project-specific hazard assessment.
Ingress by particles or water Toz Test Odası
Yağmur Test Odası
Choose the exact dust or IP water method, specimen mounting and acceptance criteria. Dust, spray, immersion and high-pressure hot-water exposures are not interchangeable.
Corrosion exposure Tuz Sıvı Test Odası Define neutral salt spray, CASS or another specified procedure, specimen size, collection conditions and whether a cyclic climate sequence is required.
Light-driven material weathering UV Chamber
Ksenon Odası
Fluorescent UV and filtered xenon light use different spectra and procedures. Match lamp/filter, irradiance, specimen temperature, moisture and the property being measured.
For multi-stress programs, plan the sequence—not just the shopping list. State which exposures are separate and which must occur simultaneously, whether specimens move between systems, and what is measured after each stage. The applicable method and edition, loaded performance and acceptance records determine whether a proposed configuration is suitable.

Turn a Test Plan into a Comparable Equipment Proposal

A useful RFQ connects the procedure, specimen, facility and acceptance evidence. Include these four inputs for each test stage.

Exposure
Standard/edition, setpoints, timing, sequence and tolerance
Specimen
Drawing, loaded dimensions, mass, fixture and operating heat
cURL Too many subrequests by single Worker invocation. To configure this limit, refer to https://developers.cloudflare.com/workers/wrangler/configuration/#limits
Sensor positions, records, calibration and pass/fail criteria
Facility
Power, water, exhaust, access and required safety provisions

Send your complete test plan to DERUI for a chamber-family and configuration review →

WhatsAppWhatsApp
WhatsAppWhatsApp
WhatsApp
MesajMesaj

Teklif Talep Edin